Cisco 2960-S Series with 48 Gigabit 10/100/1000 ports. This switch supports the PoE+ protocol.
Enclosure type: 1 RU, Rack-mountable
Number of Ports: 48 10/100/1000 Ethernet ports and 2 SFP+ uplinks
Speed / Data Transfer Rate: 10/100/1000
Performance Details: 176 Gbps
QoS (Quality of Service): Yes
Network Management Type: Managed
Switch Capacity: 255 VLANs
Remote Management Protocol: • BRIDGE-MIB • CISCO-CABLE-DIAG-MIB • CISCO-CDP-MIB • CISCO-CLUSTER-MIB • CISCO-CONFIG-COPY-MIB • CISCO-CONFIG-MAN-MIB • CISCO-DHCP-SNOOPING-MIB • CISCO-ENTITY-VENDORTYPE-OID-MIB • CISCO-ENVMON-MIB • CISCO-ERR-DISABLE-MIB • CISCO-FLASH-MIB • CISCO-FTP-CLIENT-MIB • CISCO-IGMP-FILTER-MIB • CISCO-IMAGE-MIB • CISCO-IP-STAT-MIB • CISCO-LAG-MIB • CISCO-MAC-NOTIFICATION-MIB • CISCO-MEMORY-POOL-MIB • CISCO-PAGP-MIB • CISCO-PING-MIB • CISCO-POE-EXTENSIONS-MIB • CISCO-PORT-QOS-MIB • CISCO-PORT-SECURITY-MIB • CISCO-PORT-STORM-CONTROL-MIB • CISCO-PRODUCTS-MIB • CISCO-PROCESS-MIB • CISCO-RTTMON-MIB • CISCO-SMI-MIB • CISCO-STP-EXTENSIONS-MIB • CISCO-SYSLOG-MIB • CISCO-TC-MIB • CICSO-TCP-MIB • CISCO-UDLDP-MIB • CISCO-VLAN-IFTABLE • RELATIONSHIP-MIB • CISCO-VLAN-MEMBERSHIP-MIB • CISCO-VTP-MIB • ENTITY-MIB • ETHERLIKE-MIB • IEEE8021-PAE-MIB • IEEE8023-LAG-MIB • IF-MIB • INET-ADDRESS-MIB • OLD-CISCO-CHASSIS-MIB • OLD-CISCO-FLASH-MIB • OLD-CISCO-INTERFACES-MIB • OLD-CISCO-IP-MIB • OLD-CISCO-SYS-MIB • OLD-CISCO-TCP-MIB • OLD-CISCO-TS-MIB • RFC1213-MIB • RMON-MIB • RMON2-MIB • SNMP-FRAMEWORK-MIB • SNMP-MPD-MIB • SNMP-NOTIFICATION-MIB • SNMP-TARGET-MIB • SNMPv2-MIB • TCP-MIB • UDP-MIB • ePM MIB • CISCO-STACKWISE-MIB (2960-S)
Networking Standards: • IEEE 802.1D Spanning Tree Protocol • IEEE 802.1p CoS Prioritization • IEEE 802.1Q VLAN • IEEE 802.1s • IEEE 802.1w • IEEE 802.1X • IEEE 802.1ab (LLDP) • IEEE 802.3ad • IEEE 802.3af • IEEE 802.3ah (100BASE-X single/multimode fiber only) • IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports • IEEE 802.3 10BASE-T specification • IEEE 802.3u 100BASE-TX specification • IEEE 802.3ab 1000BASE-T specification • IEEE 802.3z 1000BASE-X specification • 100BASE-BX (SFP) • 100BASE-FX (SFP) • 100BASE-LX (SFP) • 1000BASE-BX (SFP) • 1000BASE-SX (SFP) • 1000BASE-LX/LH (SFP) • 1000BASE-ZX (SFP) • 1000BASE-CWDM SFP 1470 nm • 1000BASE-CWDM SFP 1490 nm • 1000BASE-CWDM SFP 1510 nm • 1000BASE-CWDM SFP 1530 nm • 1000BASE-CWDM SFP 1550 nm • 1000BASE-CWDM SFP 1570 nm • 1000BASE-CWDM SFP 1590 nm • 1000BASE-CWDM SFP 1610 nm • 10GBASE-LR (SFP+) • 10GBASE-SR (SFP+) • 10GBASE-LRM (SFP+) • 10GBASE-CX1 (SFP+) • RMON I and II standards • SNMP v1, v2c, and v3
Layer: Layer 2
VLAN Support: Yes
MAC Address Table: 8000
DHCP Server: Yes
IGMP Snooping: Yes
Authentication Method: RADIUS , Secure Shell (SSH) , TACACS+
MAC Address Filtering: Yes
Connectivity: Wired
Memory Configuration: 128 MB Installed; 64 MB Flash Memory
Power Details: 740W Available PoE Power
MTBF (Mean Time Before Failure): 183,498 hours
Temperature Range (storage): -13 °F to 158 °F
Temperature Range (operating): 23 °F to 104 °F
Relative Humidity Range: 10 to 95% (non-condensing)
This item is Refurbished. This item has been tested by Vibrant's team of experienced technicians test to ensure proper operation.
Part of the innovative Catalyst series, the Cisco WS-C2960S-48FPD-L showcases cutiing edge technology and is the perfect fit for anyone or business looking to increase sustainability, a borderless experience, and maintain utmost security across all channels. The cisco WS-C2960S-48FPD-L adapts to the ever changing business needs and comes loaded with a host of features to include dynamic IP address assignment, dynamic trunking protocol, Syslog support, broadcast storm control, auto negotiation, layer 2 switching, trivial file transfer protocol, BOOTP support, load balancing, jumbo frames port, 64 MB flash memory and 128 MB RAM.
Related Models: